Installing Openerp 6.1 On Ubuntu 10.4LTS

Installing openerp on ubuntu 10.4 LTS is very easy task to do

Just following the steps mentioned u can install Openerp in less than 20 mins.

1.       sudo apt-get install openssh-server denyhosts

2.       sudo apt-get update

3.       sudo apt-get dist-upgrade

4.       sudo adduser --system --home=/opt/openerp --group opener

5.       sudo su - openerp -s /bin/bash

6.       sudo apt-get install postgresql

7.       sudo su – postgres

8.      createuser --createdb --username postgres --no-createrole --no-superuser --pwprompt openerp
Enter password for new role: ********
Enter it again: ********

9.       exit

10.   sudo apt-get install python-dateutil python-feedparser python-gdata \
python-ldap python-libxslt1 python-lxml python-mako python-openid python-psycopg2 \
python-pybabel python-pychart python-pydot python-pyparsing python-reportlab \
python-simplejson python-tz python-vatnumber python-vobject python-webdav \
python-werkzeug python-xlwt python-yaml python-zsi

11.   sudo apt-get install python-pip

12.   sudo apt-get remove python-werkzeug

13.   sudo pip install werkzeug

14.   wget http://nightly.openerp.com/6.1/releases/openerp-6.1-1.tar.gz

15.   cd /opt/opener

16.   sudo tar xvf ~/openerp-6.1-1.tar.gz

17.   sudo chown -R openerp: *

18.   sudo cp -a openerp-6.1-1 server

19.  The default configuration file for the server (in /opt/openerp/server/install/) is actually very minimal and will, with only one small change work fine so we’ll simply copy that file to where we need it and change it’s ownership and permissions:

sudo cp /opt/openerp/server/install/openerp-server.conf /etc/
sudo chown openerp: /etc/openerp-server.conf
sudo chmod 640 /etc/openerp-server.conf

The above commands make the file owned and writeable only by the openerp user and group and only readable by openerp and root.

20.  To allow the OpenERP server to run initially, you should only need to change one line in this file. Toward to the top of the file change the line db_password = False to the same password you used back in step 3. Use your favourite text editor here. I tend to use nano, e.g.

sudo nano /etc/openerp-server.conf

21.  One other line we might as well add to the configuration file now, is to tell OpenERP where to write its log file. To complement my suggested location below add the following line to the openerp-server.conf file:

logfile = /var/log/openerp/openerp-server.log

22.  Once the configuration file is edited and saved, you can start the server just to check if it actually runs.

sudo su - openerp -s /bin/bash
/opt/openerp/server/openerp-server

23.  For the final step we need to install a script which will be used to start-up and shut down the server automatically and also run the application as the correct user. There is a script you can use in /opt/openerp/server/install/openerp-server.init but this will need a few small modifications to work with the system installed the way I have described above. Here’s a link to the one I’ve already modified for 6.1-1.

Similar to the configuration file, you need to either copy it or paste the contents of this script to a file in /etc/init.d/ and call it openerp-server. Once it is in the right place you will need to make it executable and owned by root:

sudo chmod 755 /etc/init.d/openerp-server
sudo chown root: /etc/init.d/openerp-server

24.  In the configuration file there’s an entry for the server’s log file. We need to create that directory first so that the server has somewhere to log to and also we must make it writeable by the openerp user:

sudo mkdir /var/log/openerp
sudo chown openerp:root /var/log/openerp

25.  To start the OpenERP server type:

sudo /etc/init.d/openerp-server start

You should now be able to view the logfile and see that the server has started.

less /var/log/openerp/openerp-server.log

If there are any problems starting the server you need to go back and check. There’s really no point ploughing on if the server doesn’t start…

If the log file looks OK, now point your web browser at the domain or IP address of your OpenERP server (or localhost if you are on the same machine) and use port 8069. The url will look something like this:

http://IP_or_domain.com:8069

What you should see is a screen like this one:

26.  What I do recommend you do at this point is to change the super admin password to something nice and strong (Click the “Manage Databases” link below the main Login box). By default this password is just “admin” and knowing that, a user can create, backup, restore and drop databases! This password is stored in plain text in the /etc/openerp-server.conf file; hence why we restricted access to just openerp and root. When you change and save the new password the /etc/openerp-server.conf file will be re-written and will have a lot more options in it.

Now it’s time to make sure the server stops properly too:

sudo /etc/init.d/openerp-server stop

Check the logfile again to make sure it has stopped and/or look at your server’s process list.

If everything above seems to be working OK, the final step is make the script start and stop automatically with the Ubuntu Server. To do this type:

sudo update-rc.d openerp-server defaults

You can now try rebooting you server if you like. OpenERP should be running by the time you log back in.

If you type ps aux | grep openerp you should see a line similar to this:

openerp 1491 0.1 10.6 207132 53596 ? Sl 22:23 0:02 python /opt/openerp/server/openerp-server -c /etc/openerp-server.conf

Which shows that the server is running. And of course you can check the logfile or visit the server from your web browser too.